DWG NO. TTL-003 · SHEET METAL & FORMING
Flat stock. Cut, formed, finished.
10kW fiber lasers with an automated material tower cutting full 5×10 sheets up to 1″ thick around the clock, three CNC press brakes forming to 8 feet and 80 tons, and welding and finishing handled on the same PO. The brackets, gussets, and plates arrive with the tubes they bolt to — one PO, one truck.
FIG. 1 — 10KW FIBER LASER, 5×10 BED, MATERIAL TOWER
10kW
Fiber lasers
24/7
Tower-fed cutting
1″
Max thickness
3
CNC press brakes, to 80T
SEC. 01 — LASER CUTTING
FIG. 2 — FIBER LASER CUTTING
10kW fiber laser cutting
Tower-fed — cutting 24/7, lights out
High-power fiber lasers cut clean, square edges through everything from gauge material to 1″ plate, across a full 5×10 bed. An attached automated material storage tower feeds the laser sheet after sheet — so it cuts around the clock, unattended, without ever stopping to wait on a forklift. Big jobs that stall other shops for weeks come off our table in days. No other shop in the Dallas–Fort Worth metroplex runs this combination of capability and speed.
SEC. 02 — CNC FORMING
Press brake forming
Three CNC brakes — 8-foot beds, 80 tons
Three CNC press brakes put repeatable, accurate angles into laser-cut blanks — brackets, channels, enclosures, and formed panels held consistent from the first part to the last, with enough capacity that forming never becomes the bottleneck. Because the same shop cuts the blank and forms it, bend allowances are dialed into the flat pattern before the laser ever fires.
FIG. 3 — CNC PRESS BRAKE, FORMED PART
SEC. 03 — WELDING & FINISHING
Welded assemblies
Sixteen full-time welders and six robotic cells join cut and formed parts — sheet to sheet, sheet to tube — into complete weldments, in the same building where the parts were made.
Coating, fully managed
Powder coating, zinc plating, and galvanizing — coordinated end to end by our finishing team through trusted coating partners, all on your PO. You never chase a coater; parts arrive finished, not “ready for finishing.”
Packaged & shipped worldwide
Our in-house packaging and logistics team kits hardware, packages finished product, and ships it anywhere in the world — to your dock, your job site, or straight to your customer.
Send the flat patterns too.
Quotes back in hours. 5216 David Strickland Rd, Fort Worth, TX · 714-388-7020